Abate may be used to prevent foam formation in the spray tank, or alternatively may be used to remove foam created during the mixing operation. Abate has a rapid defoaming action, reduces filling/mixing time and is convenient and simple to use.

RATES OF USE The optimum rate of Abate will vary with the crop protection products being mixed, with temperature and with water conditions. As a guide use the lower recommended rate initially, and then add further Abate if required: Water volume Amount of Abate required 200L/ha 10-50ml

MIXING Half fill the spray tank with clean water and commence agitation. Add Abate at the lowest rate recommended. Then add the recommended quantity of crop protection product, continuing agitation. If after the tank is filled, foam still persists add Abate directly into the foam, up to the maximum rate recommended until the foam disappears.

PRECAUTIONS WASH HANDS AND EXPOSED SKIN before meals and after work. WHEN USING DO NOT EAT, DRINK OR SMOKE. KEEP AWAY FROM FOOD, DRINK AND ANIMAL FEEDING STUFFS. KEEP OUT OF REACH OF CHILDREN. Do not contaminate surface waters or ditches with chemical or used container. KEEP IN ORIGINAL CONTAINER, tightly closed, in a safe place. WASH OUT CONTAINER THOROUGHLY and dispose of safely. Abate is a trade mark of Interagro (UK) Ltd. Interagro UK Ltd Sworders Barn, Sworders Yard North Street, Bishops Stortford Herts CM23 2LD Tel: +44 (0) 1279 501995 Fax: +44 (0) 1279 501996 info@interagro.co.uk www.interagro.net ver. 10/01/05 • top